How to Inspect and Replace Anode Rod in Water Heater

Because most water heater tanks are made of steel coated with a thin layer of glass, the lining will eventually crack and begin to rust. To head off corrosion a metal "anode rod" is used to increase the life of the tank. The anode rod is a magnesium or aluminum rod that encapsulates a steel core. The rod is screwed into the top of the tank and suspended in the water. An electrochemical process causes the exposed steel of the rod to react with the corrosive elements in the water. By causing a primary corrosive reaction inside the tank the rod sacrifices itself to help protect the steel tank from corrosion, greatly extending it's life.

Inspecting and Replacing the Anode Rod

One of the most important plumbing maintenance task is to ensure the anode rod is still working inside the tank. The rod can be accessed from the top of the water heater by unscrewing it and sliding it out. If the rod has significantly eroded away it should be replaced with a new rod. Replacing a worn out rod is far less expensive then replacing an entire rusted out water heater!

Need Expert Plumbing Services?

ABC Plumbing has you covered. As the leading plumbers, trust us with all your plumbing needs!

Check Out Our Plumbing Services in the Following Locations:

Also check the following blog post: What's the Purpose of a Water Heater Expansion Tank?

Related Services

Our Blog

VIEW ALL BLOGS

Can Tankless Water Heaters Get as Hot as Conventional Tank Water Heaters?

When switching from a conventional tank-style water heater to a tankless one, homeowners often wonder if the tankless system can provide water as hot as the tank water heater. The answer is yes, as most tankless water heaters can be adjusted between 100° to 140°. However, it's crucial to size the tankless water heater properly based on household needs, considering factors like climate and the number of water sources it will supply simultaneously. For guidance on choosing the right water heater for your home, contact ABC Plumbing for assistance.

What Causes Pink Stains and Rings in Toilets and Bathtubs: Bacteria, Solutions, and Prevention

The blog explains that pink stains commonly found in bathrooms are caused by a bacteria called Serratia marcescens, which thrives in moist environments. When diluted by water, this bacteria produces a red-orange pigment that results in pinkish stains on surfaces like bathtubs, toilets, and showers.
READ MORE
What Is That Gurgling Under My Sink - Causes, Fixes, and Prevention

The blog discusses two common causes of gurgling sounds from under sinks: clogs forming in the pipes and blocked vent pipes. Clogs occur due to various materials going down the drain, while blocked vent pipes create a vacuum, hindering water flow. It advises contacting a plumber for expert assistance in clearing clogs or removing blockages to resolve the issue.
READ MORE
How to Fix a Blank White Rodgers Thermostat

You might have experienced the worry that comes with discovering your White Rodgers thermostat has gone blank. The good news is that usually, the unit can be brought back to life. In this blog, let's look at some ways to get your blank White Rodgers thermostat operating again.
READ MORE