One of the best ways to extend the life of your water heater and ensure it operates efficiently is to flush the tank annually to remove sediment buildup. The process is straightforward, here are the steps:
- Shut off the water supply. Locate the cold water supply valve at the top of the water heater and turn it to the off position.
- Turn off the water heater. If you have a gas water heater, simply turn the thermostat knob to the “pilot” setting. If the water heater is electric, turn off the power at the breaker panel.
- Attach a garden hose to the drain valve located near the bottom of the tank. Place the other end of the hose near a floor drain, in a bucket (have several large buckets to empty into and rotate them if needed) or outside the home. CAUTION: Even though a water heater may be off for hours, the water in the tank may still be hot enough to scald.
- Open a hot water tap. Open a hot water tap on a floor above that is nearest the water heater. This will relieve pressure in the system, helping the water drain from the tank.
- Open the drain valve. After all the water has drained from the tank, turn the cold water supply at the top of the tank back on for a moment. This will clear out any remaining sediment. Repeat this step until the water runs clear.
When you're finished draining the tank, return it to operating condition by following these steps:
- Close the drain valve
- Remove the hose
- Turn on the cold water supply and refill the tank.
- Return to the hot water tap you opened earlier. Once cold water begins to flow from the tap, turn it off.
- Turn the gas valve back on from the pilot position or turn electricity back on to the tank.
- Check the valve opening to ensure it's not leaking.
IMPORTANT: Always read and follow all manufacturer’s directions and warnings for your particular water heater. Some water heater tanks need to be completely filled to avoid damage to the gas burner or heating elements. Need help maintaining your water heater? Call ABC Plumbing, Sewer, Heating, Cooling and Electric. We can help with all your home plumbing needs.
Also check the following blog post: What's the Purpose of a Water Heater Expansion Tank?
Related Services
Our Blog
VIEW ALL BLOGSChicago Residents: How to Handle Emergency Toilet Repairs
-
Avoid Electrical Hazards This Holiday Season in Des Plaines
Holiday gatherings bring cheer but also increase electrical risks, especially with holiday lights and heating appliances. Protect your home by following essential safety tips and relying on licensed professionals like ABC Plumbing for inspections and repairs, ensuring a safe and joyous season.READ MORE -
How To Check Your Furnace Flue Each Heating Season
The flue safely transports combustion gases through your home and up through the roof, expelling them above the roofline. Any blockages, leaks, or damage to the flue could allow combustion gases to enter your home, with dangerous or even deadly health consequences. Learn more in this blog post.READ MORE -
5 Causes of a Low Hot Water Supply (And How to Fix Them)
If your water heater isn't heating adequately, potential causes include a broken dip tube, sediment buildup, malfunctioning heating components, distant placement from faucets causing heat loss, or an undersized tank unable to meet demand. Regular maintenance and inspection by a licensed plumber can address these issues and ensure optimal performance.READ MORE
Our Promises To You
-
Convenient For You
We Work on Your Schedule
-
Background Checks
We do Drug Tests And Background Checks Before Hiring
-
No Need For Stress
Get ABCs Worry-Free Guarantee at No Cost
-
No Surprises
Pricing is By the Job, Not the Hour